Since this command is used to idle, the following are possible: a) The passage will be carried out at a speed of idle, not working speed. The plugin can use the G0 command to work on straight segments. To set a higher speed, you will need to replace the F750 parameter with the F1750. The maximum stroke speed in the plug-in can be limited to 1000. Depending on the machine, it may be necessary to replace parameter S255 with S1000. If the laser power is specified in%, a G-code can be generated indicating the power 0-255 where 255 corresponds to 100%. All replacements are for example purposes only. Perhaps the necessary changes to the G-code (depending on the version of the plugin) We use the notepad and the quick change command “Ctrl + H”. File Name 25.adding a numerical suffix to the file name (it is convenient that you do not overwrite the name each time, the number at the end of the file name simply increases) 26. Lowering the laser along the Z axis after each pass – 0 (not used in this case) 23. The delay before movement after turning on the laser is 0 (it makes sense when milling) 21.Number of passes – 1 22. Laser power – 1000 (depending on the version of the plug-in, it can be indicated in% or specific numbers) 20. The speed of movement with the laser on (stroke) – 750 (depending on the material) 19. The speed of movement with the laser off (idling) – 2500 (depending on the particular machine) 18. Laser turn-on command – M03 16.Laser off command – M05 17.
0 kommentar(er)
